Foam-Tac 1 oz – Flexible Foam Adhesive with UV Blockers

Foam-Tac 1 oz is the ultimate flexible adhesive for foam, carbon fiber, balsa, plywood, plastics, and more. Its improved formula now includes UV blockers, protecting bonds from yellowing and degrading when exposed to direct sunlight. A new adhesion promoter also boosts strength and durability, making Foam-Tac the trusted choice for hobbyists and RC plane builders.

Perfect for assembling and repairing foam aircraft, Foam-Tac dries clear and stays flexible without expanding or foaming. It’s strong enough to glue control surfaces directly onto the airframe—no hinge tape or additional fasteners needed!

Great For:

• Depron, BlueCor & all smooth or rough foams

• Carbon fiber, balsa wood, plywood, and plastics

• Motor mounts, control horns, rods, servos, wire tacking

• On-site field repairs with confidence

Directions for Use:

1. Surfaces must be clean and dry.

2. Spread glue evenly on both sides.

3. Let air dry for a few seconds, press together and pull apart.

4. Wait a few seconds, press together again, and pull apart.

5. After a final wait, press together for a strong, permanent bond.

6. Maximum bond strength within 24 hours.

Key Features:

• UV blockers for outdoor durability

• Flexible, non-foaming formula

• Dries clear and won’t become brittle

• Now available in mini tubes for added convenience

Materials It Bonds:

• All types of foam (smooth & rough)

• Styrofoam, Depron, BlueCor

• Carbon fiber

• Balsa wood, plywood

• Many plastics

Cure Time: 24 hours or less